Garage floor coating
Garage Floor Coating Contractors in Lake Elsinore for Ground and Sealed Floors
We diamond grind the floor, repair the cracks and flaking spots, then coat it with epoxy or polyurea so it locks in instead of sitting on top.
Free, no-obligation estimates. We answer the phone or call back the same working day.
- GroundDiamond ground first
- RepairedCracks and spalls fixed
- SealedEpoxy or polyurea
Bare concrete to a sealed floor
Garage floor coating contractors in Lake Elsinore
We prepare and coat concrete garage floors in Lake Elsinore with epoxy or polyurea systems.
Most of the job is the part you never see. Oil, tire marks and old stains come off with the grinder, the cracks and pitted spots get filled, and only then does the coating go down on clean, open concrete.
Ground concrete has open pores and a rough face, so the coating locks into the slab instead of sitting on top of it.
What goes on the floor
Coating systems we install
We install epoxy and polyurea floor coating systems, finished with a topcoat suited to the way your garage gets used.
The coating systems we install, one per card:
-
Epoxy floor system
100% solids, cycloaliphatic
An epoxy with no solvents or fillers, so what we roll onto the garage floor is the coating itself, ground in and sealed.
-
Polyurea floor system
Strength and flexibility
Polyurea floor coatings are valued for being strong and flexible, a good match for a floor that takes cars, tools and daily traffic.
-
Topcoat for the use
Matched to the garage
Standard epoxy is not slip resistant and can be slippery when wet, so the topcoat is chosen for how the garage is used.
Not sure which system fits your garage? We look at the floor and tell you on the free estimate.
Grinder, patch, then coat
Grinding, crack repair and coating
We diamond grind the floor, repair cracks and spalled spots, then lay the coating so it bonds into the opened surface.
Every garage floor we coat goes through these five steps:
- Look at the floor
We check the cracks, the flaking and the stains, and how old the slab is. Fresh concrete has to cure about 28 days before anything goes on it.
- Diamond grind the whole floor
Industrial diamond grinders with 20-grit bits take off dirt, oil and stains. Built-in dust extraction keeps down the silica dust that OSHA: Crystalline Silica warns about.
- Repair cracks, voids and spalls
Cracks, holes and the flaking the trade calls "spalling" are repaired before the coating goes on, so it covers a sound, even slab.
- Lay the coating
The epoxy or polyurea goes down on the ground surface, where the open pores let it bond into the concrete, then the topcoat goes on.
- Clean up and hand it back
We clean up when the work is done, so all that is left in the garage is the new floor.
Straight talk on cost
How a garage floor coating is priced
A garage floor coating is priced by the floor area, the repair the slab needs and the coating system you choose.
These three things set where your floor lands:
- Floor area
A single bay and a double garage with a workshop corner are different jobs; the square footage sets most of the price.
- The repair the slab needs
Cracks, voids and spalled spots all get fixed before the coating, and a rough floor takes more of that prep.
- The coating system
Epoxy or polyurea, and the topcoat that suits the garage, change the material and the labor.
Typical ranges in Lake Elsinore
Garage floor coating typically runs
$3 to $15
per square foot
For an average two-car garage, typically
$1,200 to $6,000
for the whole floor
These are typical ranges for the area, not our quote. We price your floor after we see it, and we quote the whole job before we start.
Free, no-obligation estimates, with no surprise charges after.
Why neighbors call us
A garage floor job, done the way we said
A coating holds when the prep is done right and the people doing it keep their word. Licensed and insured, and this is what you can count on:
- Free, no-obligation estimates
- We answer the phone or call back the same working day
- We show up when we say we will
- We quote the whole job before we start, with no surprise charges after
- We clean up when the work is done
Coatings for home garages and commercial floors
We coat home garages and commercial concrete floors.
At home that is the single or double garage and the workshop in it. For a business it is the shop floor, the storage room or the service bay.
Where we coat garage floors around Lake Elsinore
We do garage floor coating across Lake Elsinore and the nearby towns our service area lists, within about 15 miles.
That takes in Lakeland Village, Wildomar, Canyon Lake, Menifee, Perris and Murrieta. A job farther out is a question for the call.
Google reviews
What neighbors say about working with us
These are our own Google reviews, shown exactly as they were written.
I hired this concrete contractor for my driveway replacement and I couldn’t be happier with the results. The team was professional, showed up on time, and worked efficiently to get everything done ahead of schedule. The finish is smooth, durable, and really improved the curb appeal of my home. I would definitely recommend them for any concrete work.
Nick, and coworker did a outstanding job. Working on our front yard. My neighbor was so impressed he’s planning on hiring Nick, to do their front yard. Thanks, Nick
Trustworthy, dependable, and quality service. Greenscape Projects transformed my backyard space into a beautiful oasis. Budget friendly prices. Affordable landscaping made possible with greenscape Projects. They arrived on time, cleaned up afterwards and sent pictures of the progress. Trust Greenscape Projects for all of your landscaping, gardening, yardscaping needs.
Straight answers
Garage floor coating questions we hear most
What is the average cost to coat a garage floor?
In Lake Elsinore, garage floor coating typically runs $3 to $15 per square foot, or $1,200 to $6,000 for an average two-car garage. These are typical ranges for the area, not our quote.
What is the highest rated garage floor coating?
No one coating suits every garage. Polyurea floor coatings are valued for strength and flexibility, and the epoxy we install is 100% solids cycloaliphatic epoxy with no solvents or fillers. Either one lasts only as well as the prep under it, which is why we diamond grind every floor first.
How much does it cost to epoxy a 500 square foot garage floor?
A floor that size is priced mostly by its square footage, then by the cracks and spalled spots to repair before the coating and by the system you choose. We measure the floor on the free estimate and quote the whole job before we start, so the number you hear is the number you pay.
How much does it cost to epoxy 1000 square feet of flooring?
On a floor that large, the prep weighs as much as the size: grinding the whole surface, repairing cracks and voids, the finish chosen and the labor all add up. Repairing and resurfacing concrete costs far less than tearing it out and replacing it.
Get your garage floor ground, repaired and sealed
Call and tell us about the floor: its size, the cracks, the oil stains. We come out, look at it and tell you plainly which coating fits.
We quote the whole job before we start, with no surprise charges after.
Free, no-obligation estimates. We answer the phone or call back the same working day.